|
Hawbakers workers putting a coat of blacktop on the ramp.
This is a THIN LAYER DENSITY GAUGE that tells the operator if they
have to run the roller over it again.
This is the rig they use when they want to get under the bridge
and do some work.
Spreading the hot mix............
This photo shows the hot mix coming out of the SHUTTLE BUGGY
material transfer vehicle....
The trucks dump the hot mix into a hopper on the right end of this machine
and then it dumps it into the spreading machine from the left end......
The SHUTTLE BUGGY material transfer vehicle can receive 25 tons
of hot mix and then return and transfer the mix without interfering with the
paver's continuous speed...
Yellow arrows indicate the edges of the concrete beam.......green arrows indicate
the rebar loop that is embedded in the concrete beam.........you can see the silver
deck pans.........
This is how they hang the wooden platform from the steel beams.. The
platform will hold the concrete for the overhang.
A welder at work on the steel "I" beam.......
Yellow arrows indicate the overhead cameras.........."A" is the signal for traffic
going right to Rt 15 south..... "B" are the signals over the south bound
lanes...
"C" is the signal to turn left and go to Market Square coming from ramp "A".
This photo shows the camera that they will use for traffic control....
The concrete block will hold up a steel overhead truss which will have
direction signs for going south.....west.....or east.....
CLICK HERE TO GO TO THE NEXT PAGE.....264
|
